Fission-Produced 99Mo Without a Nuclear Reactor.

99Mo, the parent of the widely used medical isotope 99mTc, is currently produced by irradiation of enriched uranium in nuclear reactors. The supply of this isotope is encumbered by the aging of these reactors and concerns about international transportation and nuclear proliferation. Methods: We report results for the production of 99Mo from the accelerator-driven subcritical fission of an aqueous solution containing low enriched uranium. The predominately fast neutrons generated by impinging high-energy electrons onto a tantalum convertor are moderated to thermal energies to increase fission processes. The separation, recovery, and purification of 99Mo were demonstrated using a recycled uranyl sulfate solution. Conclusion: The 99Mo yield and purity were found to be unaffected by reuse of the previously irradiated and processed uranyl sulfate solution. Results from a 51.8-GBq 99Mo production run are presented.

Capture chromatography for Mo-99 recovery from uranyl sulfate solutions: minimum-column-volume design method.

Molybdenum-99 (Mo-99), generated from the fission of Uranium-235 (U-235), is the radioactive parent of the most widely used medical isotope, technetium-99m (Tc-99m). An efficient, robust, low-pressure process is developed for recovering Mo-99 from uranyl sulfate solutions. The minimum column volume and the maximum column length for required yield, pressure limit, and loading time are determined using a new graphical method. The method is based on dimensionless groups and intrinsic adsorption and diffusion parameters, which are estimated using a small number of experiments and simulations. The design is tested with bench-scale experiments with titania columns. The results show a high capture yield and a high stripping yield (95±5%). The design can be adapted to changes in design constraints or the variations in feed concentration, feed volume, or material properties. The graph shows clearly how the column utilization is affected by the required yield, loading time, and pressure limit. The cost effectiveness of various sorbent candidates can be evaluated based on the intrinsic parameters. This method can be used more generally for designing other capture chromatography processes.

Anion concentration-dependent partitioning mechanism in the extraction of uranium into room-temperature ionic liquids.

The mode of partitioning of uranyl ion between nitrate-containing aqueous phases and various N,N'-dialkylimidazolium-based room-temperature ionic liquids (RTILs) in the presence of tri-n-butyl phosphate (TBP) is shown to change from an ion-exchange process to one involving extraction of a neutral uranyl-TBP-nitrato complex as the aqueous nitrate concentration is increased. Increasing the hydrophobicity of the RTIL cation eventually leads to nitrato complex extraction as the predominant mode of partitioning, regardless of nitrate concentration.

Solute-induced dissolution of hydrophobic ionic liquids in water.

Significant solubilization of ostensibly water-immiscible ionic liquids (ILs) in acidic aqueous phases is induced by the presence of any of a variety of neutral extractants, the apparent result of the formation of the protonated form of the extractant and its subsequent exchange for the cationic component of the IL. The extent of this solubilization is shown to diminish with increasing hydrophobicity of the IL cation and decreasing extractant basicity. These observations raise concerns as to the viability of ILs as "drop in replacements" for traditional organic solvents in the solvent extraction of metal ions.

Fluorous ionic liquids as solvents for the liquid-liquid extraction of metal ions by macrocyclic polyethers.

The predominant mode of strontium ion transfer from aqueous nitrate media into a series of 1-fluoroalkyl-3-methylimidazolium bis[(trifluoromethylsulfonyl)]imides containing dicyclohexano-18-crown-6 (DCH18C6) is shown to shift from cation exchange to strontium nitrato-crown ether complex partitioning as the length of the fluoroalkyl substituent is increased. Fluoroalkyl substituents are shown to be only slightly more effective than their non-fluorous analogs at inducing this shift. At the same time, the fluorinated ionic liquids (ILs) yield strontium distribution ratios as much as an order of magnitude lower than the corresponding 1-alkyl-3-methylimidazolium (C(n)mim(+)) salts. Fluorous ILs thus appear to offer no compelling advantages over C(n)mim(+) ionic liquids as extraction solvents.

Identical extraction behavior and coordination of trivalent or hexavalent f-element cations using ionic liquid and molecular solvents.

The extraction of both UO2(2+) and trivalent lanthanide and actinide ions (Am3+, Nd3+, Eu3+) by dialkylphosphoric or dialkylphosphinic acids from aqueous solutions into the ionic liquid, 1-decyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide has been studied and compared to extractions into dodecane. Radiotracer partitioning measurements show comparable patterns of distribution ratios for both the ionic liquid/aqueous and dodecane/aqueous systems, and the limiting slopes at low acidity indicate the partitioning of neutral complexes in both solvent systems. The metal ion coordination environment, elucidated from EXAFS and UV-visible spectroscopy measurements, is equivalent in the ionic liquid and dodecane solutions with coordination of the uranyl cation by two hydrogen-bonded extractant dimers, and of the trivalent cations by three extractant dimers. This is the first definitive report of a system where both the biphasic extraction equilibria and metal coordination environment are the same in an ionic liquid and a molecular organic solvent.

SYNTHESIS OF SYMMETRICAL METHYLENEBIS(ALKYL HYDROGEN PHOSPHONATES) BY SELECTIVE CLEAVAGE OF METHYLENEBIS(DIALKYL PHOSPHONATES) WITH MORPHOLINE.

The preparation of partial esters of methylenebisphosphonic acids has been of recent interest due to their potential therapeutic applications. This paper describes a convenient method to prepare symmetrical methylenebis(alkyl hydrogen phosphonates) by the selective cleavage of the corresponding methylenebis(dialkyl phosphonate) with refluxing morpholine. The effects of structural variations on the amine as well as the substrate have been investigated to understand the scope and limitations of this reaction. A superior approach to hindered bisphosphonic acid esters involves the cleavage of their dimethyl esters, 4, using morpholine. This method is also useful to access a number of C-alkyl dialkyl methylenebisphosphonic acids such as 6. This study clearly shows that cleavage with morpholine is convenient, inexpensive, and allows for the preparation of a variety of P,P'-disubstituted partial esters in good yields and high purity.